Adding The Router Behind An Existing Router - TRENDnet TEW-432BRP Guide D'installation Rapide

17. Please wait while the
TRENDnet Router Setup
configures your router.
18. Click Next.
19. Click Next.
20. Select Exit TRENDnet
Router Setup and then
click Finish.
21. Open up your browser and
type in a URL (e.g.
www.trendnet.com) to see
if you are online.
4. Adding the router behind
an existing router
1. Select No, I want to connect
my new router to my
existing router and use
both of them and then click
Next.
2. Find the Ethernet cable that
goes from your computer to
your old router. Unplug this
cable from your old router
and connect it to yellow port
number 1 on your new
TRENDnet router. Then click
Next.
Warning! DO NOT plug the cable or DSL modem power
supply into the TEW-432BRP.
3. Connect the included power
supply from an available
outlet to the TEW-432BRP.
4. Connect one end of the
included grey Ethernet cable
to the grey port labeled WAN
on the back of your new
router. Connect the other end
of the cable to one of the
LAN ports on your old router.
Then click Next.
15
English
8 0 0 2 5 . 0 3 . 0 n o s i e r V