TRENDnet TEW-432BRP Guide D'installation Rapide page 13

9. Connect the included power
supply from an available
outlet to the TEW-432BRP.
10. Please wait while the
TEW- 432BRP is being
configured.
11. Connect one end of the
included grey Ethernet cable
to the grey port labeled
WAN on the back of your
new router. Connect the
other end of the cable to
your cable or DSL modem.
Then click Next.
12. Reconnect the power
supply to your cable or DSL
modem. Wait 30 seconds
then click Next.
13. If this window appears, your
Internet connection requires
a user name and password.
Enter your DSL Account
Name and Password. Then
click Next.
14. Please wait while the
TRENDnet Router Setup
configures your router.
15. Enter a password for your
router. By default, the
password is admin. Click
Next.
16. Enter a unique network
name (SSID) for your
wireless network and then
click Next. The network
name (SSID) identifies your
wireless network.
11
English
8 0 0 2 5 . 0 3 . 0 n o s i e r V
3