Koro Espresso UL 120V Manuel D'installation, D'utilisation Et D'entretien page 28

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MISCELLANEOUS
This menu contains some of the functions that are used
less frequently concerning the machine parameters.
TECH>
SET PARAMETERS
Fresh-brew unit data
For the Fresh-brew unit it is possible to set the brewing time,
the drying time for the used dose and the extraction
pressure.
Jug Facilities
Some models, supplied with a special button, permit
dispensing of a number of selections (programmable be-
tween 1 to 9; 5 as default) without cup to fill a jug.
Programming the password
It is a 5-digit numeric code which is required to access
programming.
The default value of this code is set to 00000.
Enabling the password
This function is used to enable the option of requesting the
password to access programming; the password request is
disabled by default.
Counter reset password
This function is used for setting the password that must be
entered while in normal operating mode (door closed) for
resetting the selection counters.
With the password set to zero, this function is disabled.
Multiple dispensing password
It is possible to set the password that must be entered while
in normal operating mode (door closed) for obtaining the
consecutive dispensing of several selection (jug facilities).
The function is disabled at the end of the selection.
With the password set to zero, this function is disabled.
© by N&W GLOBAL VENDING SpA
TECH>
MISCELLANEOUS
24
Free Vend password
This function is used for setting the password that must be
entered while in normal operating mode (door closed) for
activating the Free Vend function.
The function is disabled at the end of the selection.
Keypad lock password
It is possible to set the password that must be entered while
in normal operating mode (door closed) for activating/
deactivating the keypad lock.
With the keypad lock on, the display will indicate "SUSP.
SERVICE"
With the password set to zero, this function is disabled.
Wash password
This function is used for setting the password that must be
entered while in normal operating mode (door closed) for
performing a mixer wash cycle.
Test selection password
It is possible to set the password that must be entered while
in normal operating mode (door closed) for accessing
maintenance/programming mode and make some test
selections.
To return to normal operating mode, change from the FILL
area to TECH and vice versa 3 times.
Filter reset password
This function is used for setting the password required for
resetting the message "Replace water filter" with the door
closed and resetting the counter after replacing the filter.
Enabling the Filler menu
This function is used to determine the filler menu options to
be left active or to be disabled.
The reference numbers of the menus do not change even
if some are disabled.
0512 264 - 00

Publicité

Table des Matières
loading

Table des Matières