Abus TVVR50000 Mode D'emploi page 26

Click Apply, then OK.
You can configure the recorder for connection to a network here
(provided the recorder is connected). Select the desired connec-
tion speed. Automatic detection (Auto) is set as a default and is
recommended.
MA-4101-002-Bedienungsanleitung-TVVR50000+TVVR60000.indb 26
Exit the screen by pressing Exit. Click Next.
24
To assign the address data automatically, tick the DHCP box. The
addresses are then assigned automatically by the router (pro-
27
vided this function is supported). In this case, proceed from point
35 onwards.
Click Enter.
25
Example:
IP address: 192.168.0.1
IP address: 192.168.0.50
If your router does not assign the address data automatically,
then enter the data manually as shown in the following steps. The
28
screenshot shows an example of devices to be connected with
corresponding IP addresses.
26
IP address: 192.168.0.40
29
16.09.2010 11:23:13