Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Test Time
The PosiTector BHI has an on-screen timer to measure the
hardness of a material after a given period of time.
Use the
and
taking a reading, the timer starts automatically once the indentor
is on the surface and the ▼ symbol appears on the display.
Increases the displayed resolution. Accuracy is not affected.
Cont. Reading
When enabled, the Gage will continuously display probe readings.
Ideal when a test timer is not required or when performing a
calibration verification. Cont. Reading is not available when
Memory, Statistics, or HiLo Alarm modes are enabled.
Sound
Adjusts the volume of built-in speaker (Off, Low, Medium, High).
Flip Lock
Disables the Auto Rotate feature by locking the display in its
current orientation.
Touch
Allows the touch screen functionality to be disabled. All gage
functions can also be controlled using the navigation buttons.
Set Clock
All measurements are date and time stamped (24-hour format)
when stored into memory. It is therefore important to set the
correct date and time. Use the
value, and the
and time setting can also be viewed at the top of the main menu.
Battery Type
Selects the type of batteries used in the Gage from a choice of
"Alkaline", "Lithium" or "NiMH" (nickel-metal hydride rechargeable).
The battery state indicator symbol is calibrated for the selected
battery type. No damage will occur if the battery type used in the
Gage does not match the selected battery type.
buttons to adjust the test duration. When
(Continuous Reading)
and
buttons to adjust it. The current date
and
buttons to select a
7
Publicité
Table des Matières
