Auto Power-Off Function - Korg SDD-3000 PEDAL Manuel D'utilisation

NO DRY function
When the NO DRY function is enabled, the dry sound (original sound) is not output from the
OUTPUT jacks. This is effective when using the parallel effect loop of a guitar amp or connecting
to the SEND/RETURN jack of a mixer.
When the NO DRY function is enabled, adjust the volume of the effect with the BALANCE knob.
Tip: The NO DRY function is disabled as the factory default.
: Enable.
: Disable.
When the NO DRY function is enabled, the dry sound will not be sent from the main OUTPUT
even if the Effects are off.

Auto Power-Off function

The SDD-3000 PEDAL has an Auto Power-Off function that automatically turns off the power when
four hours have elapsed since the most recent user input.
If the auto power-off function is activated, power will not be restored even if a footswitch or button
is used. Reinsert the cable into the INPUT (L/MONO) jack to turn on the power.
Tip: The Auto Power-Off function is enabled as the factory default.
: Enable.
: Disable.
Setting the MIDI channel
Set the MIDI channel of the SDD-3000 PEDAL. In order to exchange data with an external MIDI
device, the MIDI channel of the SDD-3000 PEDAL must match the MIDI channel of your external
MIDI device.
Note: In order to exchange MIDI data with a connected external MIDI device, the SDD-3000 PEDAL
and the MIDI device must be connected with a MIDI cable, and their MIDI channels must be set
appropriately.
– : 1ch–16ch
24