Publicité
Les langues disponibles
Les langues disponibles
m
ATTENTION! RISK OF DAMAGE TO
PROPERTY! Have the installation done by
experienced persons only. Leaks or escape of
water can lead to serious damage to buildings
or household fittings and furniture. Check all
connections for leaks carefully.
Ensure that all seals are correctly seated to prevent
leakage of water.
m
CAUTION! DANGER OF SCALDING! When
making the hot water setting please ensure that the
temperature of the water is not too high.
Please read carefully through these operating
instructions before installing and using the product.
Keep all the safety advice and instructions in a safe
place for future reference!
Do not connect the shower hose 6 directly to a
shut-off valve, always connect the shower hose with
the provided diverter 7 .
Before wall mounting, check that the wall can
take the weight of the product. If in doubt, ask in a
specialist shop.
m
CAUTION! WATER DAMAGE! Check the
installation area for the presence of hidden water
pipes before drilling the holes for the fasteners 11
and wall fixing part 15 i.e. using a pipe and metal
detector.
Examine the wall before installation and choose
suitable installation fixings. We have supplied
fixings suitable for an ordinary solid masonry wall.
˜ Mounting
Tip: For fittings with ¾" (26.4 mm) connection, use
an adaptor with ¾" (26.4 mm) inner thread and
½" (21 mm) outer thread, available in DIY store or
bathroom shops.
Please refer to fig. A–E.
Note: Fasten hose connections and converter hand-
tight.
˜ Operation
Use the diverter 7 to switch between shower
head 13 and hand shower 2 .
How to adjust the hand shower 2 :
Adjust the height of the hand shower holder 12 by
using the adjustment knob.
Adjust the angle at which the hand shower is tilted
by using the hand shower holder 12.
Water-saving insert:
The water-saving insert 3 reduces the flow of
water. This may have an effect on how your
continuous-flow water heater works. If the flow of
water is too low, your continuous-flow water heater
will automatically switch off.
Diverter function:
Press the corresponding button to select the
corresponding function (overhead shower or hand
shower).
˜ Cleaning and care
Clean the product with a soft, damp cloth and use
a mild cleaning agent if necessary.
Remove the limescale on the product by using a
commercially available limescale remover. Please
follow the directions for using your cleaning agent.
GB/IE
9
Publicité
