Table des Matières
Publicité
BUTTONS
3. BUTTONS
AUTO
TEMP.
COOL
E
SET
DRY
CLOCK
HEAT
TIMER
HOUR
ON
OFF
FAN
MODE
FAN SPEED
M
7
SWING V
SLEEP
TIMER ON
SWING H
IONIZER
TIMER OFF
SELF CLEAN
CLOCK
RESET LOCK
AUTO CLEAN
6
OPEN
05
5
I FEEL / SELF CLEAN Button
Active/Disable I FEEL function for each press.
When the I FEEL function is activated,
the remote display is actual temperature at
its location. The remote control will send this
signal to the air conditioner every 3 minutes
until press the I FEEL button again.
The I FEEL function is not available under
DRY and FAN mode. Switch the operation mode
or turn off the unit will cancel the I FEEL function
automatically.
When press more than 2 seconds, the
SELF CLEAN function will be activated, press
more than 2 seconds again to disable.
Under SELF CLEAN mode, the air conditioner
will automatically clean and dry the evaporator
and keep it as fresh for the next operation.
6
VENT / AUTO CLEAN Button
Disable/ActiveVENT function for each press.
When press more than 2 seconds, the AUTO
CLEAN function will be activated, press more
than 2 seconds again to disable.
The AUTO CLEAN is only available when the
air conditioner is off.
7
FAN Button
Press tis button to select the fan speed:
AUTO
LOW
MED
HIGH
BUTTONS
3. BUTTONS
AUTO
TEMP.
COOL
E
SET
DRY
CLOCK
HEAT
TIMER
HOUR
ON
OFF
FAN
MODE
FAN SPEED
M
SWING V
SLEEP
TIMER ON
SWING H
IONIZER
TIMER OFF
SELF CLEAN
CLOCK
RESET LOCK
AUTO CLEAN
OPEN
TIMER ON Button (
)
8
Press this button to initiate the auto-on time
sequence. Each press will increase the auto-
timed setting in 30 minutes increments. When
the setting time displays 10, each press will
increase the auto-timed setting 60 minutes
increments. To cancel the auto-timed program,
simply adjust the auto-on time to 0.0.
TIMER OFF Button (
)
Press this button to initiate the auto-off time
sequence. Each press will increase the auto-
timed setting in 30 minutes increments. When
the setting time displays 10, each press will
increase the auto-timed setting 60 minutes
increments. To cancel the auto-timed program,
simply adjust the auto-off time to 0.0
9
CLOCK Button (
)
To set the remote clock.
10
SLEEP Button (
)
Active/Disable sleep function. It can maintain
the most comfortable temperature and save
energy.
,,
For the detail, see sleep operation in
,
,,
USER S MANUAL.
NOTE: While the unit is running under
SLEEP mode, it would be cancelled if
MODE, FAN or ON/OFF button is pressed.
06
Publicité
Chapitres
Table des Matières
