Table des Matières
Publicité
OPERATION
4. OPERATION
AUTO
COOL
DRY
HEAT
FAN
Step 3
MODE
FAN SPEED
Step 1
M
Step 2
AUTO
COOL
DRY
HEAT
FAN
Step 4
MODE
FAN SPEED
Step 3
Step 1
M
Step 2
09
Auto mode
Ensure the unit is plugged in and power is available.
The OPERATION indicator on the display panel of
the indoor unit starts flashing.
1. Press the MODE button to select Auto.
2. Press the UP/DOWN button to set the desired
temperature. The temperature can be set within
O
O
O
O
a range of 17 C~30 C(62 F~88 F) in 1 C(2 F)
increments.
3. Press the ON/OFFbutton to start the air
conditioner.
NOTE
1. In the Auto mode, the air conditioner can logically
choose the mode of Cooling, Fan, and Heating
by sensing the difference between the actual
ambient room temperature and the setting
temperature on the remote controller.
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
Cooling /Heating/Fan mode
Ensure the unit is plugged in and power is available.
1. Press the MODE button to select COOL, HEAT
or FAN mode.
2. Press the UP/DOWN buttons to set the desired
temperature. The temperature can be set within
O
O
O
O
O
a range of 17 C~30 C(62 F~88 F) in 1 C(2 F)
increments.
3. Press the FAN button to select the fan speed in
four steps- Auto, Low, Med,or High.
4. Press the ON/OFF button to start the air
conditioner.
NOTE
In the FAN mode, the setting temperature is not
displayed in the remote controller and you are not
able to control the room temperature either. In this
case, only step 1, 3 and 4 may be performed.
OPERATION
4. OPERATION
O
O
Step 3
MODE
Step 1
Step 2
O
Dry mode
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
AUTO
COOL
display panel of the indoor unit starts flashing.
DRY
1. Press the MODE button to select DRY mode.
HEAT
2. Press the UP/DOWN buttons to set the
FAN
desired temperature. The temperature
FAN SPEED
can be set within a range of 17 C~30 C
M
O
(62 F~88 F) in 1 C(2 F) increments.
3. Press the ON/OFF button to start the air
conditioner.
NOTE:
In the Dry mode, you can not switch the fan
speed. It has already been automatically
controlled.
O
O
O
O
O
10
Publicité
Chapitres
Table des Matières
