- To maintain the performance of the device, about twice per year, clear the dust.
Do not use abrasive products.
- For models with a fan, use a vacuum cleaner to clear the air inlet and outlet grids, as well as the fil-
ter.
The fan is fitted with an antidust filter which, when clogged, can result in its stoppage ( lit on the
device).
For better use, clean your filter regularly, according to the following instructions:
Red indicator
Clean the
filter.
Restart the heating.
- Please ensure that children do not lean on the device or play close to it when it is operating : its
surface may be hot enough to cause burns to their skin in some circumstances, particularly because
their reflexes may not yet have been acquired or are slower than those of an adult. If there is any
risk, fit a protective grill in front of the device.
- This device is not intended for use by persons (including children) with physical, sensory or mental
disability, or by persons lacking experience or knowledge, unless they have received from a person
in charge of their safety adequate supervision or preliminary instructions on how to use the device.
- Prevent children from climbing on the device.
- In order to avoid a hazard for very young children, this device should be installed so that the lowest
heated rail is at least 600 mm above the floor.
- Any intervention on the electrical parts must be performed by skilled staff.
- Do not insert objects or paper in the device.
- Upon first warming, a slight smell may appear, due to the evacuation of compounds used during the
device's manufacturing.
- The casing may be hot, even when the device is off.
M
AINTENANCE
Power off the
heating.
Refit the
filter.
W
ARNING
21
Extract the
filter from
the back of
the machine.
Wait 10
minutes
before restar-
ting the hea-
ting.
GB