Maintenance; Warning - Thermor Riva 2 Notice D'installation Et D'utilisation

- To maintain the performance of the device, about twice per year, clear the dust.
Do not use abrasive products.
- For models with a fan, use a vacuum cleaner to clear the air inlet and outlet grids, as well as the filter.
The fan is fitted with an antidust filter which, when clogged, can result in its stoppage ( lit on the
device).
For better use, clean your filter regularly, according to the following instructions:
Red indicator
Clean the
filter.
Restart the heating.
- When filling a Mixed device, the hot water circuit must necessarily be used to allow the fluid to
expand in the heating circuit.
- Children must not lean on the device or play close to it when it is operating : its surface may be
hot enough to cause burns to their skin in some circumstances, particularly because their reflexes
may not yet have been acquired or are slower than those of an adult. If there is any risk, fit a pro-
tective grill in front of the device.
- This device is not intended for use by persons (including children) with physical, sensory or mental
disability, or by persons lacking experience or knowledge, unless they have received from a person
in charge of their safety adequate supervision or preliminary instructions on how to use the device.
- Prevent children from climbing on the device.
- In order to avoid a hazard for very young children, this device should be installed so that the lowest
heated rail is at least 600 mm above the floor.
- For safety reasons, it is strictly forbidden to top up unmixed devices. If necessary, contact the manu-
facturer's After-Sales Service or a qualified technician.
- Any intervention on the electrical parts must be performed by skilled staff.
- Do not insert objects or paper in the device.
- Upon first warming, a slight smell may appear, due to the evacuation of compounds used during the
device's manufacturing.
M
AINTENANCE
Power off
the heating.
Refit the
filter.
W
ARNING
23
GB
Extract the
filter from
the back of
the machine.
Wait 10
minutes
before restar-
ting the hea-
ting.