Locking The Device On The Hanging Frame; Maintenance - Thermor Émotion 3 Notice D'utilisation

LOCKING THE DEVICE ONTO THE HANGING FRAME
Position the tilted de-
vice on brackets S1 .
To unlock the device from the hanging frame, take a flat-bladed
screwdriver and push the slider towards the wall .
Lift the device while holding the slider in place with your
screwdriver . Tilt it forwards and then remove it from brackets S1 .
To retain the performance of the device, it is necessary about twice a
year to carry out dust removal using a vacuum cleaner or a brush at
the air inlets and outlets. Every five years, have the inside of the device
checked by a professional electrician . The outside of the device can be
cleaned with a damp cloth .
Never use abrasive products or solvents
Pivot the
upwards and lift it to
position it on brac-
kets S2 .

MAINTENANCE

35
device Lower
onto
frame . A click tells
you that the device is
fastened and locked
in place .
.
the device
the hanging
CLIC
GB