Technical Characteristics; Connection Terminals - Comelit SimpleHome 20046912 Mode D'emploi

Table des Matières

Les langues disponibles

WARNING

• Install the equipment by carefully following the instructions given by the manufacturer and in compliance with the

standards in force.

• All the equipment must only be used for the purpose it was designed for. Comelit Group S.p.A. declines any responsibility

for improper use of the apparatus, for any alterations made by others for any reason or for the use of non-original

accessories or materials.

• All the products comply with the requirements of the 2014/30/UE, 2014/35/UE directives, as certified by the CE

mark they carry.

• Installation, mounting and assistance procedures for electrical devices must only be performed by

specialised electricians.

• Cut off the power supply before carrying out any maintenance work.

ART. 20046912 – SIMPLEHOME FLUSH-MOUNTED INTERFACE MODULE WITH 2 RELAYS (RL2)

Interface with two 6A resistive relays (cosj=1) for connection to bus modules with open-collector outputs, for example those

controlling a rolling shutter motor. The outputs on the device are not suitable for controlling particularly heavy loads or halogen and

fluorescent lamps. When controlling these load types, a support relay must be used at each output.

Power supply voltage

Absorption

Inputs

Outputs

Protection

Indications

Terminals

Positioning

Applicable standards

Approvals

Operating temperature

Storage temperature

Relative air humidity

Accessories included

Weight

Dimensions

1 2 3