Modifying The Programmed On/Off Timer (Clock Mode) - AERMEC WRC1 Manuel De L'utilisateur

Modifying the programmed ON/OFF timer (CLOCK mode):

Clock mode is used to manage several functions:
(a) time band management: this function is used to set a switch ON time and a subsequent switch OFF times, thereby defi n-
ing a time band within which the Indoor unit will operate;
(b) only programmed switch ON: this function is used to set a switch ON time for the unit;
(c) only programmed switch OFF: this function is used to set a switch OFF time for the unit;
To set clock mode functions, perform the following operations:
(1)
with the unit ON, press the "TIMER" button; at this stage, the working "ON" appears and fl ashes to indicate the time when
the switch ON operation should be performed;
(2)
press the ( ) or ( ) buttons, respectively to decrease or increase the switch on time by 0,5 hours;
(3)
press the "TIMER" button to save the switch ON time, the wording "ON" remains steady, while the wording "OFF" appears
and fl ashes (to indicate that the switch OFF time must be entered
(4)
press the ( ) or ( ) buttons, respectively to decrease or increase the switch off time by 0,5 hours;
(5)
press the "SWING/ENTER" button to save the time band settings and exit modify mode;
WARNING: after completing the entry of a time band, pressing the "TIMER" button again will activate cancel mode;
whenever the "TIMER" button is pressed, the system passes from "ON" time to "OFF" time (the time currently selected
will fl ash); after selecting the time to be cancelled, pressing the "SWING/ENTER" button will eliminate it.
To set the various func ons described at the beginning of this paragraph iden fi ed as (a), (b) and (c), the sequence of opera ons
may be diff erent; there follow the complete sequences for every func on:
(a) me band management: (1) + (2) + (3) + (4) + (5);
(b) only programmed switch ON: (1) + (2) + (5);
(c) only programmed switch OFF: (1) + (3) + (4) + (5);
);
(1)
this icon indicates
that CLOCK mode
is ac ve
EN
55