Set The Antifreeze Function On Indoor Unit - AERMEC WRC1 Manuel De L'utilisateur

EN

Set the ANTIFREEZE function on indoor unit:

This function (only in Heat mode) allows setting a minimum room temperature; after setting it, the function is activated automat-
ically if the room temperature falls below 6°C and is then deactivated when the temperature rises above 10°C; to activate or
de-activate this function, perform the following operations:
(1)
press the "FUNCTION" key until the icon for this function appears (
thereby indicating that the function has been selected;
(2)
press the "SWING/ENTER" button again to activate the selected function;
(1)
64
); at this stage, the selected icon will begin to fl ash,
(2)
WARNING: to disac vate this func on,
press the "FUNCTION" bu on un l the
func on to be cancelled is selected and then
press the "SWING/ENTER" button