Troubleshooting - Panasonic ES-LL41 Mode D'emploi

Troubleshooting

Perform the following actions.
If the problems still cannot be solved, contact the store
where you purchased the unit or a service center authorized
by Panasonic for repair.
Problem
The power switch
does not turn ON.
The shaving sensor
does not respond.
18
PB016461 - ES-LL2141-K551 _(01EN)_08-01-18.indd 18
Action
Unlock the switch lock.
(See page 13.)
Depending on the beard thickness
or the amount of beard trimmings
in the shaver head, the shaving
sensor may not react and the
driving sound may not change.
This is not abnormal.
The shaving sensor may not
respond depending on the type and
quantity of the shaving gel. This is
not abnormal.
The shaving sensor may not
respond when the remaining
battery capacity is low. If this
happens, recharge the shaver.
Apply oil. (See page 16.)
The shaving sensor may not
respond when there is not enough
oil on the blades.
Problem
Clean the beard trimmings from the
shaver.
When the shaver is extremely dirty,
wash with water.
(See page 15.)
The shaving sensor
responds even
Replace the system outer foil and/
though the shaver is
or inner blades.
not in contact with the
Expected life of system outer foil
skin.
and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
Apply oil.
This can be improved by cleaning
Operating time is
every time after shaving.
short even after
charging.
When the number of operations per
charge starts to decrease, the
battery is nearing the end of its life.
Action
2018/8/1 17:25:30