Problem
Shaver does not
operate even after
charging.
The driving sound
changes while
shaving.
Makes a loud sound.
The odor is getting
stronger.
PB016461 - ES-LL2141-K551
_(01EN)_08-01-18.indd 19
Action
Use the appliance in an ambient
temperature approximately 5 °C
(41 °F) or higher.
The battery has reached the end of
its life.
The shaver will not operate with the
AC adaptor connected.
Please use the shaver after it has
been sufficiently charged and the
AC adaptor disconnected.
The shaving sensor is operating.
The sound changes depending on
the beard thickness.
Apply oil.
The blades will not move smoothly
when there is no oil on the blades,
requiring more power.
The shaver makes a high-pitched
sound due to the linear motor drive.
This does not indicate a problem.
Confirm that the blades are
properly attached.
This can be improved by cleaning
every time after shaving.
Problem
Shavings fly out in all
This can be improved by cleaning
directions.
every time after shaving.
Apply oil.
Check if the system outer foil is
System outer foil gets
damaged or deformed.
hot.
If yes, replace it.
(See page 16.)
This can be improved by cleaning
every time after shaving.
Replace the system outer foil and/
or inner blades.
Expected life of system outer foil
You do not get as
and inner blades:
close a shave as
System outer foil:
before.
Approximately 1 year
Inner blades:
Approximately 2 years
Apply oil.
Action
19
2018/8/1 17:25:30