Presetting Stations - Aiwa XR-MR5 Mode D'emploi

PRESETTING STATIONS

f,g
s
a
c
TUNER
The unit can store a total of 32 preset stations. When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in a preset station directly.
1 Press TUNER repeatedly to select a band.
2 Press f or g to select a station.
3 Press a to store the station.
A station is assigned a preset number, beginning from 1 in
consecutive order for each band.
4 Repeat steps 1 to 3.
The next station will not be stored if a total of 32 preset stations
have already been stored.
TUNER
0-9,+10
a
s
f,g
c
Preset number
Frequency
PRESET NUMBER TUNING
1 Press TUNER to select a band.
2 Press c.
Each time the button is pressed, the next ascending preset
number is selected.
Tuning by preset number
1 Press TUNER to select a band.
2 Press the numbered buttons on the remote control to select a
preset number.
Example:
To select preset number 10, press +10 and 0.
To select preset number 15, press +10 and 5.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
s, and press a within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
NOTE
If there is a long period of power failure or disconnection of AC
cord, the presetting of the station is canceled. In this case, preset
again.
En
11
ENGLISH