One for All URC3610 Mode D'emploi page 5

SETUP
The Essential TV remote is pre-programmed to control a Samsung
TV out of the box. If you have a Samsung TV, after you have inserted
batteries, press a few keys to confirm that the remote operates your TV.
SIMPLESET
If the brand of your device is shown in the SimpleSet List next to a digit
key, you can use the SimpleSet system described in this section, please
locate the brand of your device and note the key associated with it.
TV
To set up your device:
1.
2.
3.
4.
5.
6.
• If you find one or more keys do not work as you expect, start again at
step 2 – the remote will start with the next code in the memory.
712847 Essential-TV CAN_Manual URC3610 RDN1111220 incl. Codelist.indd 5 712847 Essential-TV CAN_Manual URC3610 RDN1111220 incl. Codelist.indd 5
Element
Insignia
LG
Philips, Magnavox
Samsung, Panasonic, Sceptre
Sharp, Hisense
Sony, Sanyo
TCL, RCA
Toshiba, Westinghouse
VIZIO
Turn on your device (not on standby) and point the Essential
remote towards it.
Hold down the SETUP key until the LED
blinks twice
Hold down the digit key for your brand as listed in
the tables above - e.g. 3 for an LG TV.
The remote will send a Power command every 3 seconds.
As soon as your device reacts by turning off, release the digit.
The LED will blink twice and the remote should now operate
your device.
5
11-12-2020 12:18 11-12-2020 12:18