Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1
Introduction
1.1 Description
The Wi is a new range heater employing that
incorporates the smart i2Control thermostat.
1.2 Characteristics
• i2Control auto-programmable thermostat. You do
not have to programme your heater. The unit will do it
for you automatically.
• Its presence sensor and algorithms continually
monitor your life style habits and controls your
electricity consumption at all times, especially your
comfort.
• It has three operating modes, "learning", sensor and
manual.
• Open window detection. If you leave a window
open, the unit will switch itself off to prevent energy
wastage.
• The keyboard in touch sensitive.
1.3 Panel controls / Screen
10
9
8
Description :
1. Sensor
2. Temperature indicator
- Red = Comfort
- Blue = Anti-frost
- Green = Economy
3. Operating mode indicator:
- Flashing = "Learning" mode
- Fixed = Sensor mode
- Off = Manual mode or "Forced"
programming mode (via Smartbox App (not
included)).
4. "Forced" programming mode (via Smartbox App
(not included)).
5. Sensor indicator
6. Heating On
7. Increase
8. Decrease
9. Screen:
- Ambient temperature
- Selected temperature
- Clock and day
10. Standby
11. "Open windows" indicator
2
Installation
2.1 Regulations:
• It is essential that the heater IS FIRMLY FIXED TO
A FIRM WALL AND LEVELLED.
• In order to optimize presence detection of your
heater, do not install it in a "dead" angle or behind a
piece of furniture.
• The heater must never be installed just below a
mains socket.
1
2
3
4
5 m
11
5
6
7
2.2 Safety measures:
50 cm
• Take into account the heater
location so that it can detect
presence over the largest possible
area of the room.
• The presence sensor will not
detect any movement if the distance
to the heater exceeds five metres.
• Remember that the sensor will
detect the movement of pets.
• DO NOT PLACE ANY OBJECTS
IN FRONT OF OR ANYWHERE
NEAR THE SENSOR.
15 cm
Page 29
Publicité
Table des Matières
