Remote Controller - Pioneer A-10-K Mode D'emploi

> Before Start > Part Names

Remote Controller












> Install > Initial Setup




> Playback
Supplementary information | Advanced Setup | Others
1. Í STANDBY/ON button: Turns the unit on or into standby mode.
2. DIMMER button: Switch the display off or adjust the brightness of the display in three
steps.
3. INPUT SELECTOR buttons: Switches the input to be played.
4. button: Input source played switches each time you press one of these buttons.
5. SHUFFLE button: Set shuffle play.
6. REPEAT button: Set repeat play.
7. TOP MENU button: Move to the top menu of the selected input.
8. Cursors, ENTER button: Select the item with the cursors and press ENTER to confirm.
9. SETUP button: Displays the Setup menu.
10.Play buttons:
: Move to the track before the one being played.
:
/;: Play or pause play.
9: Move to the next track.
∫: Stop playback.
0 Depending on the input, the operation may not start.
11. CLEAR button: Used when entering text, etc.
12.DISPLAY button: Press to turn off the display of this unit. Press again to turn the display
on.
13.NOW PLAYING button: When you have changed the display during play, for example, this
button returns the display to show information about the file being played.
14.RETURN button: Returns the display to the previous state.
15.NET RADIO MENU button:Use this when playing the internet radio.
0 HOME MEDIA, OPTION, 22, and 11 are not used.
E
N
Approx.7 m
5