Télécharger Imprimer la page

How To Use The Manual Breast Pump - Philips AVENT SCF310/60 Mode D'emploi

Publicité

Les langues disponibles

Les langues disponibles

6) Repositioning the pump on the breast from time to time can help
stimulate your milk ducts.
Practice with your pump to find the best technique for you.
However, if the process becomes very painful, stop and consult
your breastfeeding advisor.

9. How to use the manual breast pump

1) Wash your hands thoroughly and make sure your breasts are clean.
Gently squeeze a little milk from each nipple to ensure milk ducts are
not blocked.
2) Make sure you have sterilised and carefully assembled your pump
exactly as shown in sections 3 and 6.
3) Consult the 'Hints to help you succeed' section.
4) Relax in a comfortable chair, leaning slightly forward (use cushions
to support your back). Make sure you have a glass of water nearby.
5) Press the funnel and Let-down Massage Cushion of the pump firmly
against your breast, making sure that no air can escape – otherwise
there will be no suction.
6) As you gently push down on the pump handle, you will feel the
suction on your breast. You don't need to depress the handle fully
to create a vacuum – only as much as is comfortable. Your milk will
soon start flowing, even though you may not use all the suction the
pump can generate.
7) Begin by pumping 5-6 times rapidly to initiate let-down. Then, hold the
handle down for 2-3 seconds, and allow it to return to its resting place.
These 2-3 second cycles imitate your baby's natural suckling pattern
and allow the milk to flow between strokes.
8) Milk should begin to flow after the first few strokes. Don't worry if
your milk does not flow immediately. Relax and continue pumping.
Do not continue pumping for more than 5 minutes at a time if NO
result is achieved. Try expressing at another time during the day.
GB
5

Publicité

loading

Ce manuel est également adapté pour:

Avent scf310/97Avent scf310/13Avent scd281/00Avent scf300/20