Focal Sib XL Mode D'emploi page 5

5
Sib XL is provided with a wall binding kit which allows both
vertical and horizontal positioning. The Polyfix plate allows as
well Sib XL to be fixed upon optional Hop long stands and Bop
short stands. Check with your dealer for more details.
Horizontal installation Sib XL
• Locate and mark Sib XL wall position making sure that the
tweeter be leveled with the ear of a normally seated listener.
• Place the wall rest on to the wall and drill. Use only plugs
fitting your wall material.
• If the loudspeaker cable is embedded in the wall, guide it
through the wall mounted bracket's opening as indicated.
• If the loudspeaker cable is fixed to the wall slide it under the
wall mounted bracket as indicated.
• Guide the loudspeaker cable through the Polyfix plate as
indicated.
• Connect the loudspeakers cables to the rapid push-button
binding posts (pure copper wire at least 1.5mm in diameter).
• Attach the Polyfix plate to the loudspeaker with 4 screws as
indicated. The hollow side of the plate must be directed to the
loudspeaker's inside.
• Clip the plate on the loudspeaker to the wall mounted bracket
as indicated.
Vertical installation Sib XL
• Rotate the Polyfix plate to the right angle for proper vertical
positioning.
• Follow general mounting procedures as stated above.
Sib XL: user manual