Scope Of Delivery; Safety Precautions - Storch FloorCheck Mode D'emploi

1. Scope of delivery

FloorCheck screed measuring sensor
Instruction manual
2. Safety precautions, utilisation and disclaimer
Read and pay close attention to the instructions and information contained in the instruc-
tion manual in order to ensure safe utilisation.
The FloorCheck sensor fulfils the applicable standards of European and national guide-
lines and has been developed and constructed in accordance with state-of-the-art tech-
nology. The instruction manual must be read carefully and observed in order to ensure
safe use.
The FloorCheck sensor should only be used in connection with the HPM 3000+ moisture
measuring device. The FloorCheck sensor is used for determining the absolute moisture
content in screeds.
Devices exhibiting any technical defects should not be used.
If there are any doubts with regard to the operating reliability of the instrument, then it
should be returned to the manufacturer for examination.
The determined measurement results and all conclusions are exclusively the responsibi-
lity of the user. No liability is assumed in any case for any damage which may arise from
the use of the equipment or the determined results.
Please note that the displayed values concern a weight%. These values are not directly
comparable with the often used CM%.
The label on the FloorCheck Sensor shows you the next date for mandatory device cali-
bration. Assuming intended use, calibration should occur every 2 years. Please contact
your sales representative or the STORCH Service Hotline.
35