Delivery Contents; Technical Specifications; Coupling Requirements - EUFAB JAKE Mode D'emploi

Delivery Contents / Technical Specifications / Coupling Requirements

Delivery Contents

A = Bracket with two frame holders
B = Bicycle carrier
C = 2 keys
D = 1 safety belt for bicycle frames
E = Protective cover
F = 2 knobs
G = 2 washers

Technical Specifications

Material:
Net weight:
Max. load:
Dimensions (WxHxD):
Packaging size (WxHxD):
Do not exceed the max. load of the bicycle carrier and the permitted
tongue load of the tow hitch!
The total permitted weight and permitted axle load of the vehicle
must not be exceeded with the bicycle carrier and load.
18
Steel
Plastic
for two bicycles 17 kg
with extension for third bicycle 19 kg
60 kg
approx: 108 x 75 x 60 cm
approx: 111 x 25 x 63 cm

Coupling Requirements

DANGER!
The tow hitch breaking can cause injury to
people.
The coupling may break as a result of fitting the
bicycle carrier on a coupling in a material that is too
soft.
Fit the bicycle carrier only on a coupling made
4
of St52 steel, GGG52 grey cast iron or better
quality.
Never fit the carrier on a coupling made of
4
aluminium, other light metals or plastic.
Fit the bicycle carrier only on tow hitches with the following
properties:
Material: ............................... Min. St52 steel or GGG52 grey cast iron
D-value.................................................................... ≥ 7,6 kN
Follow the instructions of the coupling manufacturer.