Problem
Shaver does not
operate even after
charging.
The driving sound
changes while shaving.
28
ES-LV97_US.indb
28
Action
Use the appliance in an
ambient temperature
approximately 5 °C (41 °F) or
higher.
The battery has reached the
end of its life.
The shaver will not operate
with the AC adaptor
connected. Please use the
shaver after it has been
sufficiently charged and the
AC adaptor disconnected.
The shaving sensor is
operating. The sound
changes depending on the
beard thickness.
Problem
Apply oil.
The blades will not move
smoothly when there is no
oil on the blades, requiring
more power.
The shaver makes a high‑
pitched sound due to the
Makes a loud sound.
linear motor drive. This does
not indicate a problem.
Confirm that the blades are
properly attached.
Clean the system outer foil
with the brush. (See
page 20.)
This can be improved by
The odor is getting
cleaning every time after
stronger.
shaving.
This can be improved by
cleaning every time after
Shavings fly out in all
shaving.
directions.
Clean the inner blades with
the brush when shavings are
adhering to the inner blades.
Apply oil.
Replace the system outer
System outer foil gets
foil if it is damaged or
hot.
deformed.
(See page 20.)
Action
2019/06/03
19:21:16