Publicité

Liens rapides

CARDIN ELETTRONICA spa
Via Raffaello, 36
31020 San Vendemiano (TV) Italy
Tel:
Fax:
email (Italian): Sales.office.it@cardin.it
email (Europe): Sales.office@cardin.it
Http:
AUTOMAZIONE PER CANCELLI A BATTENTE
AUTOMATISME POUR PORTAILS BATTANTS
AUTOMATISIERUNG FüR FLüGELTORE
AUTOMATIZACION PARA CANCILLAS BATIENTES
ITALIANO
ATTENZIONE! Prima di iniziare l'installazione leggere le
istruzioni attentamente!
Impianto tipo
Schema di montaggio
Schema elettrico (impianto tipo)
Avvertenze importanti
Istruzione per l'installazione
Sblocco manuale
Collegamento elettrico
Procedura di programmazione
Menu di visualizzazione
Comando via radio
Modalità di funzionamento
Funzionamento a batteria
Indicazioni del display
Caratteristiche tecniche
ENGLISH
ATTENTION! Before installing this device read the
following instructions carefully!
Installation example
Assembly
Wiring diagram (installation example)
Important remarks
Installation instructions
Manual release mechanism
Electrical connection
Programming procedure
Automatic repositioning
Remote control
Function modes
Battery powered operation
Indications on the display
Technical specifications
+39/0438.404011-401818
+39/0438.401831
www.cardin.it
AUTOMATION FOR HINGED GATES
Pagina
Pagine
Pagina
Pagina
Pagine
Pagina
Pagine
Pagina
Pagina
Pagina
Pagine
Pagina
Pagina
Pagina
Page
Pages
Page
Page
Pages
Page
Pages
Page
Page
Page
Pages
Page
Page
Page
BL
Instruction manual
ZVL476.00
Questo prodotto è stato testato e collaudato nei laboratori della casa costruttrice, la quale ne ha verificato la
perfetta corrispondenza delle caratteristiche con quelle richieste dalla normativa vigente. This product has been
tried and tested in the manufacturer's laboratory who have verified that the product conforms in every aspect to
24Vdc
the safety standards in force. Ce produit a été testé et essayé dans les laboratoires du fabriquant. Pour l'installer
suivre attentivement les instructions fournies. Dieses Produkt wurde in den Werkstätten der Herstellerfirma
auf die perfekte Übereinstimmung ihrer Eigenschaften mit den von den geltenden Normen vorgeschriebenen
Motors
getestet und geprüft. Este producto ha sido probado y ensayado en los laboratorios del fabricante, que ha
comprobado la perfecta correspondencia de sus características con las contempladas por la normativa vigente.
24Vdc Motors 200/BL1924ASW
ATTENTION! Avant de commencer la pose, lire
attentivement les instructions!
Exemple d'installation
Schéma de montage
Schéma électrique (exemple d'installation)
Consignes importants
Instructions pour l'installation
Déverrouillage manuel
Branchement électrique
Procédé de programmation
Menu de visualisation
Commande via radio
Modes de fonctionnement
Fonctionnement à batterie
Indications de l'afficheur
Caractéristiques techniques
ACHTUNG! Bevor mit der Installation begonnen wird, sollte
die Anleitung aufmerksam gelesen werden!
2
Anlagenart
3-7
Montagegearbeiten
8
Elektrischer Schaltplan (Anlagenart)
9
Wichtige Hinweise
9-10
Installationsanleitung
10
Manuelle Entriegelung
10-11
Elektrischer Anschluss
12
Programmierverfahren
13
Anzeigemenü
14
Funkbefehl
14-15
Betriebsmodus
15
Batteriebetrieb
16
Displayanzeigen
52
Technische Eigenschaften
¡ATENCIÓN! Antes de iniciar la instalación del sistema,
leer atentamente las instrucciones.
2
Instalación estandar
3-7
Esquema de montaje
8
Esquema eléctrico (instalación estándar )
17
Advertencias importantes
17-18
Instrucciones para la instalación
18
Desbloqueo manual
18-19
Conexionado eléctrico
20
Procedimiento de programación
21
Menú de visualización
22
Mando vía radio
22-23
Modalidad de funcionamiento
23
Funcionamiento por batería
24
Indicaciones en el display
52
Datos técnicas
1
Series
Model
BL
1924ASW
FRANÇAIS
Page
Pages
Page
Page
Pages
Page
Pages
Page
Page
Page
Pages
Page
Page
Page
DEUTSCH
Seite
Seiten
Seite
Seite
Seiten
Seite
Seiten
Seite
Seite
Seite
Seiten
Seite
Seite
Seite
ESPAÑOL
Página
Páginas
Página
Página
Páginas
Página
Páginas
Página
Página
Página
Páginas
Página
Página
Página
Date
07-03-2005
2
3-7
8
25
25-26
26
26-27
28
29
30
30-31
31
32
52
2
3-7
8
33
33-34
34
34-35
36
37
38
38-39
39
40
52
2
3-7
8
41
41-42
42
42-43
44
45
46
46-47
47
48
52

Publicité

Table des Matières
loading

Sommaire des Matières pour Cardin Elettronica BL 1924ASW

  • Page 1 CARDIN ELETTRONICA spa Instruction manual Series Model Date Via Raffaello, 36 ZVL476.00 1924ASW 07-03-2005 31020 San Vendemiano (TV) Italy Questo prodotto è stato testato e collaudato nei laboratori della casa costruttrice, la quale ne ha verificato la Tel: +39/0438.404011-401818 perfetta corrispondenza delle caratteristiche con quelle richieste dalla normativa vigente. This product has been...
  • Page 2 ESEMPIO D'INSTALLAZIONE - INSTALLATION ExAMPLE - ExEMPLE D'INSTALLATION - ANLAGENART - INSTALACIÓN ESTÁNDAR LEGENDA 1 Motoriduttore (Sx) 2 Motoriduttore (Dx) - 5 0 3 Fotocellula interna 4 Fotocellula esterna 5 Lampeggiatore 6 Selettore a chiave 7 Elettroserratura 8 Antenna esterna (Cavo coassiale RG58 Impedenza 50Ω) 9 Interruttore onnipolare con apertura contatti min.
  • Page 3 Ø25 Description : ISTRUZIONE PER IL MONTAGGIO Drawing number : DM0746 MONTAGGIO BL1924ASW Product Code : BL1924ASW Date : 16-05-2005 Draft : P.J.Heath CARDIN ELETTRONICA S.p.A - 31020 San Vendemiano (TV) Italy - via Raffaello, 36 Tel: 0438/401818 Fax: 0438/401831...
  • Page 4 LIMITI D’IMPIEGO - LIMITS OF USE - CONTRAINTES D'UTILISATION - ANWENDUNGSGRENZEN - LIMITES DE EMPLEO ESEMPIO D’INSTALLAZIONE-INSTALLATION ExAMPLE-ExEMPLE D'INSTALLATION-ANLAGENART-EJEMPLO DE INSTALACIÓN Description : DI0156 BL1924 BL1924 POSIZIONAMENTO BASE MOTORE E STAFFA ANTERIORE - POSITIONING THE MOTOR SUPPORT BASE AND REAR BRACkET 04-03-2000 Date : MISE EN PLACE DE L’EMBASE DU MOTEUR ET DE LA PATTE ANTÉRIEURE...
  • Page 5 FISSAGGIO BASE MOTORE AL PILASTRO - FASTENING THE MOTOR TO THE COLUMN - FIxATION DE L’EMBASE DU MOTEUR AU PILIER BEFESTIGUNG DER MOTORGRUNDPLATTE AM PFEILER - FIJACIÓN DE LA BASE DEL MOTOR EN EL PILAR All rights reserved. Unauthorised copying or use of the information contained in this document is punishable by law 1 8 0 FISSAGGIO BRACCIO ALL’ALBERO MOTORE - FASTENING THE OPERATOR ARM TO THE MOTOR FIxATION DU BRAS À...
  • Page 6 ISTRUZIONE PER IL MONTAGGIO Drawing number : DM0745 Rotture apertura albero 2 BL1924 Product Code : BL1924ASW Date : 17-05-2005 Draft : P.J.Heath CARDIN ELETTRONICA S.p.A - 31020 San Vendemiano (TV) Italy - via Raffaello, 36 Tel: 0438/401818 Fax: 0438/401831...
  • Page 7: Sblocco Manuale

    Draft : P.J.Heath Date : 16-05-2005 CARDIN ELETTRONICA S.p.A - 31020 San Vendemiano (TV) Italy - via Raffaello, 36 Tel: 0438/401818 Fax: 0438/401831 ELETTROSERRATURA (OPZIONALE) - ELECTRIC LOCkING DEVICE (OPTIONAL) - SERRURE ÉLECTRIQUE (EN OPTION) ELEkTROSCHLOSS (ExTRA) - ELECTROCERRADURA (OPCIONAL) 980/xLSE11C...
  • Page 8 SCHEMA ELETTRICO IMPIANTO TIPO - STANDARD WIRING DIAGRAM - SCHÉMA ÉLECTRIQUE DE L'ExEMPLE D'INSTALLATION ELEkTRISCHER SCHALTPLAN ANLAGENART - ESQUEMA ELÉCTRICO INSTALACIÓN ESTÁNDAR All rights reserved. Unauthorised copying or use of the information contained in this document is punishable by law CC242ESBBS ANS400 CS 1218 DI0355...
  • Page 9: Consignes Pour L'utilisation

    CONSIGNES IMPORTANTES! CONSIGNES IMPORTANTES! CONSIGNES IMPORTANTES! POUR RÉDUIRE LES RISQUES DE BLESSURES GRAVES OU DE MORT, LIRE ATTENTIVEMENT LES CONSIGNES SUIVANTES AVANT DE PROCÉDER À LA POSE. PRÊTER GRANDE ATTENTION À TOUTES LES SIGNALISATIONS QUI SE TROUVENT DANS LE TExTE. LE NON RESPECT DE CES CONSIGNES POURRAIT COMPROMETTRE LE BON FONCTIONNEMENT DU SYSTÈME.
  • Page 10: Déverrouillage Manuel (Fig. 12)

    • Monter ensuite le bras articulé muni de la patte de fixation au portail Le programmateur est en mesure d’actionner automatiquement (fig. 2): le moteur quand sur l’afficheur apparaît ; ceci est signalé par une préannonce de 10 secondes. - introduire les douilles en plastique "11" dans les trous du bras arrondi •...
  • Page 11 Branchements du bornier Nota La somme des deux sorties pour dispositifs externes ne doit pas être supérieure à 10 W. CMN commun pour toutes les entrées/sorties ELS sortie pour serrure électrique (pilotée en continu) 12 Vdc – 15 W FAIRE UN PONT SUR TOUS LES CONTACTS N.F. INUTILISÉS et, en consé- 9-10 LC-CH2 sortie (contact non alimenté, N.O.) pour activation de l’éclairage quence, invalider les tests sur les dispositifs de sécurité...
  • Page 12: Procédé De Programmation (Configurations Du Programmateur Et Du Senseur De Courant)

    PROCÉDÉ DE PROGRAMMATION (configurations du programmateur et du senseur de courant) • Il est obligatoire d’installer les fins de course en ouverture et fermeture pour les deux vantaux. • Contrôler que les dispositifs de sécurité soient en veille et que la carte soit alimentée par le réseau d’alimentation; en cas contraire, il est impossible d’entrer en programmation.
  • Page 13: Menu De Visualisations

    Repositionnement automatique de nouveau normalement. Pour effectuer le repositionnement automatique sans attendre que les 3 Si le programmateur se bloque à cause d’une anomalie de comptage de minutes s’écoulent, il suffit d’envoyer une commande (TA, TC, TAL ou l’encodeur , d’un reset du programmateur , d’un débrayage TD) au programmateur.
  • Page 14: Modes De Fonctionnement

    Date : 13-04-2001 CARDIN ELETTRONICA S.p.A - 31020 San Vendemiano (TV) Italy - via Raffaello, 36 Tel: 0438/401818 Fax: 0438/401 seconde, signalant l'accès effectif au procédé de mémorisation "par radio". 4. Appuyer sur la touche de canal choisie précédemment sur l'émetteur à mémo- Signalisations LED "L4"...
  • Page 15: Fonctionnement À Batterie

    4) manœuvre d’urgence Quand les batteries se déchargent complètement (en cas de coupure de courant), le programmateur perd la mémorisation de la position En cas de défaillance du programmateur électronique qui ne répond plus aux occupée par le vantail, donc, une fois que l’alimentation de réseau a commandes, intervenir sur l’entrée EMRG1 ou EMRG2 pour manœuvrer le vantail été...
  • Page 16: Signalisations D'alarme

    Signalisations de fonctionnement INDICATIONS SUR L’AFFICHEUR (D1, page 8) Visualisations à l’allumage Programmation du temps de pause visualisé pendant deux secondes: “CC242E” = modèle de la centrale Programmation automatique en cours signale la mémorisation de la configuration des dip-switches Indique en phase de programmation que le système et la version du firmware.
  • Page 17 (Europe): Sales.offi ce@cardin.it Http: www.cardin.it CARDIN ELETTRONICA S.p.A. Il Costruttore: DICHIARA CHE L'APPARECCHIATURA DE STI NA TA AD ES SE RE IN SE RI TA IN MACCHINE E NON FUN ZIO NAN TE IN MODO IN DI PEN DEN TE...
  • Page 18 Frecuencia de recepción S449 433.92 Número de canales N° Número de funciones gobernables N° Número de códigos almacenables N° CARDIN ELETTRONICA spa Via Raffaello, 36 - 31020 San Vendemiano (TV) Italy Tel: +39/0438.404011-401818 Fax: +39/0438.401831 email (Italian): Sales.office.it@cardin.it email (Europe): Sales.office@cardin.it...

Table des Matières