Table des Matières
Publicité
ENGLISH
Beginner/Advanced switch
WARNING!
100 % IS ONLY FOR EXPERIENCED PILOTS!
13 b
30% = beginner mode
Signal sounds once on switching over.
60% = medium mode
The quadrocopter reacts more sensitively
than in 30 % mode. Signal sounds twice
on switching over.
100% = Advanced Modus -> 3D Modus
The Quadrocopter reacts very sensitive-
ly to joystick movements. Signal sounds
three times on switching over.
Headless Mode
13 c
The headless mode helps beginners
learn how to fly. Regardless of which direc-
tion the Quadrocopter is rotated, the flight
direction always corresponds exactly to the
flight direction implemented on the controller.
Therefore a beginner no longer has to steer
mirror-imaged when he flies e.g. to himself.
If you press the "Headless Mode Button"
, an acoustic signal sounds for as long
9
as you are in the Headless mode. To de-
activate the Headless mode, press the
button renewed.
180° looping is not possible in headless
mode. 3D looping and headless mode are
deactivated during 180° inverted flight.
Trimming the Quadrocopter
14
Auto-trimming
1. Place the Quadrocopter on a hori-
zontal surface.
2. Link the Quadrocopter with the con-
troller as described in "Linking the
model with the controller".
3. Slide the gas lever and the lever for
forward / back simultaneously into
the right lower corner. The LED on the
Quadrocopter flashes on briefly and
then lights up continuously. The sig-
nalling tone will sound once.
4. The neutral setting is completed.
15
When hovering, if the Quadrocopter flies to
the left or right without you moving the lever
for left / right movement, please proceed as
follows: If the Quadrocopter moves on its
own fast or slow sideways to the left, press
the lower right trimmer for right / left tilt in
steps to the right. If the Quadrocopter
moves right, press the trimmer for right /
left tilt in steps to the left.
16
When hovering, if the Quadrocopter flies
forwards or backwards without you mov-
ing the lever for forwards or backwards
movement, please proceed as follows: If
the Quadrocopter moves on its own fast or
slow forwards, press the upper right trim-
mer for forwards / backwards in steps
downwards. If the Quadrocopter moves
backwards, press the trimmer for forwards
/
backwards in steps upwards.
17
When hovering and without you moving the
lever for circling on the spot, if the Quadro-
copter rotates to left or right, proceed as
follows: If the quadrocopter rotates quickly
or slowly to the left around its own axis,
press the trimmer for rotation below left in
steps to the right. If the Quadrocopter ro-
tates to the right, press the trimmer for rota-
tion in steps to the left.
Changing the rotor blades
18
Use a smooth narrow object to help draw
off a rotor blade if necessary. Make sure
that you draw the rotor blade with great
care vertically upwards, and hold the mo-
tor from below to stabilise it.
WARNING!
19
Be sure to note the marking and colour,
also the tilt angle of the rotor blades!
Front left: red – marking "B"
Front right: red – marking "A"
Rear right: black – marking "B"
Rear left: black – marking "A"
20
Publicité
Table des Matières
