Activating/Deactivating Call Screening - Gigaset Widex W570 A Mode D'emploi

Gigaset W570A / LUG US en / A31008-M2728-R331-1-3S19 / answering_m.fm / 1/29/19
Operating the answer machine

Activating/deactivating call screening

While the caller is leaving a message on the answer machine, you can listen in via the loud-
speaker on the base or handset.
Permanently activating/deactivating call screening
¤
Menu
Base
Call screening can be simultaneously activated on the base and handset.
Deactivating call screening on the handset for the current recording
Setting up the answer machine
The answer machine has already been preset at the factory. You can configure individual
settings via the handset.
Setting up ring delay
You can set the amount of time that elapses before the answer machine is to accept a call.
¤
Menu
With Auto the ring delay is as follows:
•
If there are no new messages, the answer machine answers a call after 18 seconds.
•
If new messages are present, the answer machine answers a call after 10 seconds.
Setting the message length
You can set a maximum message length.
The options are: 1 Minute, 2 Minutes, 3 Minutes or Unlimited.
¤
Menu
length
Changing the language for the voice prompt and default announcement
¤
Menu
( = English;
34
Answer Machine
OK ( = on)
Press the end call key. The loudspeaker on the handset is deactivated.
Answer Machine
No delay / 10 sec. / 18 sec. / 30 sec. / Auto Select and press OK (
Answer Machine
OK ( = on)
= French;
Availability and operation of the functions
may differ on your telephone.
OK Call Screening
OK Ring Delay
OK Message Length
Enter the digit for the desired language
= Spanish) OK
OK Handset /
OK
= on).
OK Select the message
en fr es