Cleaning - Philips HD6971 Guide D'utilisation

ENGLISH
10
6 Stick both meat forks into the meat at slightly different angles to hold food
more securely. Next, center the meat on the skewer and fix the meat forks to the
rod by screwing them down.
Tip: Use some kitchen or butcher twine to truss the drumsticks and wings of the
chicken on the skewer.
7 Insert the skewer into the motor unit and place it on the frame (Fig. 9).
Note: The bearing part should be aligned with the opening of the side wall
(Fig. 7). The meat should be centered on the skewer allowing it to freely turn
between the metal walls.
8 Plug the grill into the power outlet. Operate the grill according to the user
manual by turning the control knob to the "On" (I) position (Fig. 10) and switch
on the motor unit by pressing the "On" (I) button to start the skewer turning
(Fig. 11).
Note: When you marinate food, only use a little oil and brush the marinade
lightly onto the food as the oil causes extra smoke.
9 Grill the chicken (or other meat) until it has reached the desired doneness and
browning (see the cooking table for suggested cooking times).
Tip: Always check internal temperature using an instant-read thermometer. Be
careful thermometer probe does not touch the metal spit as this would cause an
inaccurate reading.
10 When you have finished grilling, switch off the appliance and the rotisserie
motor unit, and remove the plug from the wall outlet.
Caution: The skewer, spit parts, metal frame, and grill are very hot, use kitchen
gloves to remove the skewer from the grill.

Cleaning

Clean the rotisserie and grill after every use.
1
After grilling, let all rotisserie parts cool down completely.
2 To clean the base of the grill, see the cleaning instructions in the user manual of
the grill.
3 Remove all detachable parts.
4 Clean all detachable parts (except the motor unit of the skewer) with
dishwashing liquid and a non-abrasive sponge or clean the parts in the
dishwasher after each use. Dry thoroughly before storing. Do not soak for
prolonged periods of time. Never use harsh abrasives or corrosive products.
5 Store in a cool, dry place.
6 The motor unit can be cleaned with a damp cloth.
Note: Do not clean the motor unit in the dishwasher.
See the separate cleaning table for further instructions.