Introduction; General Description (Fig. 1); Before First Use; Using The Appliance - Philips HD6971 Guide D'utilisation

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit from the
support that Philips offers, register your product at www.philips.com/welcome.

General description (Fig. 1)

a Motor unit
b Foldable frame
c Skewer
A. Spit rod (2 parts) with handle
B. One pair of meat forks
C. Bearing part

Before first use

1
Thoroughly clean the skewer parts and the metal frame with hot soapy water
and a non-abrasive sponge or in the dishwasher before you use the rotisserie
for the first time.
2 To insert the batteries (two D-cell batteries) into the motor unit, push to open
the battery compartment (batteries are not included in the packaging).
3 Screw the two spit rod parts together and fix the handle by screwing it on the
spit rod (Fig. 2).

Using the appliance

1 Unfold the metal frame until all four walls are stable and opposite sides are
parallel (Fig. 3).
2 Attach the frame onto the base of the grill (Fig. 4).
3 Attach the motor unit on the frame (Fig. 5). Be sure to align the two guiding slots
to slide the motor unit securely onto the frame.
4 Slide the screw end of the bearing part along the spit rod to the handle (Fig. 6).
To check proper placement, put the end of the spit rod into the hole of the
motor unit and the spit rod into the metal frame recesses. The rounding section
of the bearing part should fit exactly in the opening of the frame to allow the
rod to turn freely. Turn the screw to securely fix the bearing part in place on the
spit rod (Fig. 7).
Note: It is not necessary to detach the handle and the bearing part after each
use.
5 Remove the skewer from the metal frame. Slide one of the meat forks on the
spit rod and spit the chicken (or other meat) on the skewer. Slide the second
meat fork on the spit rod (Fig. 8).
Caution: Be careful that the metal frame does not tilt when removing the spit rod
from the motor unit.
ENGLISH
9