Connecting Water Supply Line And Power - LG ADFD544 Série Manuel D'utilisation

14 INSTALLATION
CAUTION
• Do not push the top of the dishwasher. Doing so
can damage the interior of the dishwasher.
NOTE
• Open the door and grab the body frame and the
top front opening
b
dishwasher.
1
Align the dishwasher with the opening. Make
sure the water supply line and power cord
extend smoothly without kinks or bends.
2 Smooth out or pad the edges of the hole
drilled for the water supply to avoid damaging
the drain hose.
3 Make sure the drain hose is straight before
feeding the end of it through the hole for the
of the tub to move or lift the
water supply. As you slide the dishwasher into
the opening, slowly pull on the drain hose
from inside the cabinet to take up some slack.
Be careful not to kink, pinch, crush or stress
the drain hose during installation to avoid
leaking and water damage.
4 Gradually slide the dishwasher into the
opening, making sure that the water supply
line and power cord are passing freely
through the opening and do not get caught
under the dishwasher.
• As you slide the dishwasher into the
opening, stop periodically (or have an
assistant help) to take up the slack by
pulling the drain hose farther into the
cabinet.
CAUTION
• To avoid malfunctions or leakage, it is important
that the drain hose not get kinked, pinched,
stressed or crushed behind or under the
dishwasher or inside the neighboring cabinet.
• Damage resulting from improper installation is
not covered under the warranty.
Connecting Water Supply
Line and Power
Connecting Water Supply Line
1
With the home water supply turned off,
connect the water supply tube to the tap.