Network Functions; Connecting To A Wired Network - Sony HT-ST9 Manuel D'instructions

Network Functions

Connecting to a Wired Network

Connecting the System to the Network Using a LAN
Cable
The following illustration is an example configuration of the
network.
We recommend a wired connection for stable network functioning.

 Server
 LAN cable (not supplied)
 Router
 Modem
 Internet





Tip
We recommend that you use a shielded straight interface cable (LAN
cable).
Setting up a Wired Network Connection
You can set up a wired network connection by the following
procedure.
1
Press HOME.
The home menu appears on the TV screen.
2
Select [Setup] - [Network Settings] from the home
menu.
3
Select [Internet Settings].
4
Select [Wired Setup].
The screen for selecting the IP address acquisition method
appears on the TV screen.
5
Select [Auto].
The system starts connecting to the network.
The confirmation screen appears.
6
Press / to browse information, and then press .
7
Select [Save & Connect].
The system starts connecting to the network. For details, refer to
the messages that appear on the TV screen.
If using a fixed IP address
Select [Custom] in step 5 and follow the on-screen instructions.
Tip
See [Network Connection Status] when checking the network connection
status.
15
US