Kobalt K7343 Mode D'emploi page 7

Table 1: Recommended size of extension cords
VOLTS
AMPERE
RATING
0~6
120 V~
6~10
10~12
12~16
Wear proper apparel. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other
•
jewelry which may get caught in moving parts. Nonslip footwear is recommended.
Wear protective hair covering to contain long hair.
Always use safety glasses. Also use a face or dust mask if the cutting operation is dusty.
•
Everyday eyeglasses only have impact-resistant lenses. They are NOT safety glasses.
Secure work. Use clamps or a vise to hold work when practical. It's safer than using your hand
•
and it frees both hands to operate the tool.
Don't overreach. Keep proper footing and balance at all times.
•
Maintain tools with care. Keep tools sharp and clean for the best and safest performance.
•
Follow instructions for lubricating and changing accessories.
Disconnect tools before servicing or when changing accessories, such as blades, bits, cutters,
•
and the like.
Reduce the risk of unintentional starting. Make sure switch is in the off position before
•
plugging in.
Use recommended accessories. Consult the owner's manual for recommended accessories.
•
The use of improper accessories may cause risk of injury to persons.
Never stand on the tool. Serious injury could occur if the tool is tipped or if the cutting tool is
•
unintentionally contacted.
Check damaged parts. Before further use of the tool, a guard or other part that is damaged
•
should be carefully checked to determine whether it will operate properly and perform its
intended function - check for alignment of moving parts, binding of moving part, breakage of
parts, mountings, and any other condition that may affect its operation. A guard or other part that
is damaged should be properly repaired or replaced.
Direction of feed. Feed work into a blade or cutter against the direction of rotation of the blade
•
or cutter only.
Never leave a tool running unattended. Turn power off. Don't leave tool until it comes to a
•
complete stop.
TOTAL LENGTH OF CORD IN FEET
25 ft. 50 ft.
A. W. G.
18 16
18 16
16 16
14 112
7
100 ft. 125 ft.
16 14
14 12
14 12
Not Recommended
kobalttools.com