Tools Needed - Kobalt K7343 Mode D'emploi

PARTS FOR FEATHER BOARD
OTHER PARTS FOR ASSEMBLY
Part list for the router
PARTS FOR ROUTER

TOOLS NEEDED

The following tools (not included) are needed for assembly or making adjustments.
Feather board
M6x35 bolt, washer and wing nut for attaching
the feathers to the fence
M6x35 bolt, 2 washers and wing nut for attaching
the feather to the table top
Miter-gauge assembly
Starter pin
Tabletop insert with 1-1/4-in. diameter hole
Tabletop insert with 1-7/8-in. diameter hole
Tabletop insert with 2-1/8-in. diameter hole
'Z' Wrench
Router
Dust collection with vacuum adaptor and 2 screws
Chip guard (assembled to the router)
1/4 in. collet sleeve
Open-end wrench
Heavy-duty edge guide
Phillips Screwdriver
DESCRIPTION
DESCRIPTION
DESCRIPTION
Phillips Screwdriver
8 Open-end Wrench
11
QUANTITY
3
4
2
QUANTITY
1
1
1
1
1
1
QUANTITY
1
1
1
1
1
1
kobalttools.com