Installation And Disassembly Of Heat Discharge Pipe - Gree GPC07AK-K3NNA1A Guide D'utilisation

Installation and Disassembly of Heat Discharge Pipe

Install heat discharge pipe
1. Rotate joint A and joint B clockwise into the two ends of heat discharge pipe.
clockwise
2. Insert joint A of heat
discharge pipe (the
side with "TOP" is
upwards) into the
groove until you
hear a sound.
3. Aim the locating pole of joint B of heat discharge pipe at the opening of joint C;
rotate it slightly to make joint B and joint C connect tightly.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
joint A
clasp
groove
joint B+C
tightened status
clockwise
joint B+C
heat discharge pipe
the side with "TOP" is upwards
22
opening
locating pole