Operational Instructions - Whirlpool SDD 534 U Manuel D'instructions

WASHING RESULTS
The washing results should ensure that every possible trace of solid waste has been removed from the surface of
the dishes.
At the end of the cycle, the perfectly clean dishes should dry in a couple of minutes through evaporation once the
basket is taken out of the machine.
5 – OPERATIONAL INSTRUCTIONS
Open the
the level of
mains water
detergent and rinse
cock (utility).
containers.
5.1 – DAILY USE FOR MODELS STANDARD AND ECO
The panel shown in the manual and in the graphics may
contain functions which are not present on your machine..
that the filters are in the correct position, the spray arms
aid in the
turn and that there are no foreign bodies in the
Make sure the overflow sits in the drain hole properly
Check:
dishwasher.
What to do and what happens
Activate the wall switch, open the door, insert the overflow and close
the door:
Press the on/off
indicator light turns on. Once the boiler and tank have been loaded,
the boiler led indicator light
Insert the rack
LOADING THE DISHWASHER
The basket can hold 12 dishes or 18 plates.
Remove any solid leftovers from the plates (bones, peel, nuts etc);
leave the plates to soak in cold water if there are any stubborn
leftovers, such as dried cheese, egg etc.
Put the glasses in the basket with their stem upwards.
Use the cutlery basket for cutlery. Put the cutlery loose in the basket,
preferably with the handle at the bottom. Be careful not to injure
yourself on the fork prongs and knife blades.
Wait for 15 minutes after the boiler led indicator light
CHOOSING A WASH PROGRAM (not available on all models)
You can select the wash program using the cycles selector.
Switch the main
ON/OFF switch on
(utility)
button. The boiler and tank water-loading led
turns on.
to turn off.
22