Technical Specifications; Water Connection - Whirlpool SDD 534 U Manuel D'instructions

2 – INSTALLING THE DISHWASHER / TECHNICAL SPECIFICATIONS
TECHNICAL INSTRUCTIONS:
These instructions are for qualified technicians who install, commission, test and possibly carry out
maintenance on the dishwasher.
The installation technician shall make sure the user has understood the contents of the instruction
manual, has understood how the machine works properly and knows how to load the baskets with
crockery and glasses correctly.

2.1 TECHNICAL SPECIFICATIONS

Water supply temperature
Water supply temperature (model with watersoftener)
Water supply hardness
Water supply pressure
Water supply pressure (model with watersoftener)
Rinse cycle water consumption at 200 kPa
Wash water temperature
Rinse water temperature
Net weight
Ambient temperature max
Power cable type
Refer to the rating label located on the front cover of this manual or on the right side panel of the
dishwasher for the voltage and total power.
2.2 POSITIONING
Take the dishwasher to the place of installation, unpack it, check the integrity of the appliance and its components
and inform the transporter in writing immediately if any damages should be noticed.
After unpacking, make sure the appliance has not been damaged during transport.
To dispose of the packing materials, you are recommended to dispose of the materials listed below according to
standards currently in force:
• a wooden pallet
• a nylon bag (LDPE)
• multiply card
• Polypropylene strapping (PP)
Remember that the manufacturer does not organise or manage the differentiated disposal of the appliance at the
end of its service life.

2.3 WATER CONNECTION

Temperature of the supply water
Temperature of the supply water (for versions with softener)
Hardness of the supply water
Pressure of the supply water
Pressure of the supply water (for versions with softener)
Connect the water supply to the machine using a stop valve that is capable of shutting-off the flow of water quickly
and completely.
°C 55
°C Max 30
°F 7 – 12
kPa 200/400
kPa 300/400
l 2,4/2,6
°C 50 - 60
°C 82 - 85
Min.27
kg
Max 131
°C 40
◄HAR► H07RN-F
°C 55
°C Max 35
°F 7 – 12
kPa 200/400
kPa 300/400
19