Technical Specifications - Whirlpool HGL 44 A Manuel D'instructions

Water supply temperature
Water supply temperature (model with watersoftener)
Water supply hardness
Water supply pressure
Water supply pressure (model with watersoftener)
Rinse cycle water consumption at 200 kPa
Wash water temperature
Rinse water temperature
Net weight
Ambient temperature max
Power cable type
Refer to the rating label located on the front cover of this manual or on the right side panel of the
dishwasher for the voltage and total power.
Bring the dishwasher to its installation location, remove its packaging and verify the integrity of the apparatus and of the
components. If damaged, written notification must be sent to the transporter.
The packaging elements (plastic bags, polystyrene foam, nails, etc) must not be left within reach of children and domestic
animals as they are a potential source of danger. All of the materials used for packaging are compatible with the
environment. They may be safely preserved, or may be disposed of at an appropriate waste disposal facility. The
components in plastic material subject to eventual disposal through recycling are marked in the following manner:
PE polyethylene: external wrapping, instructions bag, protection bags.
PP polypropylene: bands.
PS polystyrene foam: protective corners, packaging cover.
The wood and cardboard components can be disposed of by respecting the norms in vigor.
When disposing of the product, avoid leaving it in the environment; its disposal must respect the norms in vigor. All of the
metallic parts are in stainless steel and are detachable.
The plastic parts are marked with the symbol of the relative material.
POSITIONING:
Warning: the internal system and the locations in which communal apparatus are to be installed, must
answer to the norms in vigor.
The manufacturer declines any responsibility for direct damages to persons of things deriving from lack of respect
for the said norms.
Prior to installation verify that objects and materials which could be damaged by aqueous vapor or by spray from
washing solutions are not in the vicinity, or are adequately protected.
Position the dishwasher in the desired position and remove the protective wrapping.
Level the dishwasher (with the help of a level) on its four feet, regulating them in such a way so as to guarantee
stability; any alternate solution must be approved by the manufacturer. As placed and settled the dishwasher we
recommend to fix all legs to the ground as showed in the picture below.
2 – TECHNICAL SPECIFICATIONS
3 – POSITIONING
°C 55
°C Max 30
°F 7 – 12
kPa 200/400
kPa 300/400
l 2,4/2,6
°C 50 - 60
°C 82 - 85
Min.27
kg
Max 131
°C 40
H07RN-F
◄HAR►
20