Fibre Firebrick Panels; Door Removal And Installation - Napoleon CBI3600-N Instructions D'installation Et D'opération

REMOVAL:
A. Remove the top clips and set aside.
B. Remove the safety screen from the safety
screen frame by sliding it up and out.
C. Remove the two screws from the top
brackets of the safety screen frame.
D. Lift the safety screen frame up and away
from door frame.
INSTALLATION:
E. Install the safety screen frame into the
bottom brackets of the door frame and
secure the top brackets with the 2 screws
into the top brackets of the door frame.
F. Slide the safety screen into the safety
screen frame.
G. Install the top clips.
H. Ensure the safety screen is installed
correctly before using the appliance.
4.3

DOOR REMOVAL AND INSTALLATION

To open the door, the safety screen must be
removed to allow the door to be opened or
closed. Remove the upper screws of the door
frame assembly and loosen bottom screws. Lift
out the door frame assembly, handle carefully.
Replace the door glass and gasket.
Reverse these steps to close the door. Ensure the
safety screen is installed correctly before using
appliance.
NOTE: The protective wrap on plated parts is
best removed when the assembly is at room
temperature but this can be improved if the
assembly is warmed, using a hair dryer or
similar heat source.
4.2

FIBRE FIREBRICK PANELS

To give your insert that authentic masonry look, optional fi bre fi rebrick panels are available at your NAPOLEON /
Wolf Steel Ltd. dealer. Complete installation and maintenance instructions are included with the kit.
A.
B.
C.
D.
SCREWS
11
EN
W415-1362 / A / 09.15.16