PowerPeak FET8324P Mode D'emploi page 30

Step 8: assembling the handlebar cover
Place the T‐shaped knob (17) in the cover (11). Then place the tube spacer (16), spring washer (15) and
washer (12) on the T‐shaped knob. Secure the covers (105 + 11) with two screws (104) and four bolts
(18).
Step 9: assembling the pedals
Attach the left pedal (53L) to the left pedal tube with two allen bolts (111), two washers (49) and two
nylon nuts (50).
Attach the right pedal (53R) in the same way.
30