Tripp-Lite B002A-DP2A2 Manuel De L'utilisateur page 5

Important Safety Instructions
• When connecting or disconnecting power to hot-pluggable power supplies, observe the following guidelines:
o Install the power supply before connecting the power cable to the power supply.
o Unplug the power cable before removing the power supply.
o If the system has multiple power sources, disconnect power from the system by unplugging all power cables from the
power supplies.
• Never push objects of any kind into or through cabinet slots. They may touch dangerous voltage points or short out parts,
resulting in a risk of electrical shock or fire.
• If any of the following conditions occurs, unplug the device from the wall outlet and bring it to qualified service personnel for
repair.
o The power cord or plug has become damaged or frayed.
o Liquid has been spilled into the device.
o The device has been exposed to rain or water.
o The device has been dropped or the cabinet has been damaged.
o The device exhibits a distinct change in performance, indicating a need for service.
o The device does not operate normally when the operating instructions are followed.
• Only adjust those controls that are covered in the operating instructions. Improper adjustment of other controls may result in
damage that will require extensive work by a qualified technician to repair.
• This device is designed for IT power distribution systems with up to 230V phase-to-phase voltage.
• To prevent damage to your installation, it is important that all devices be properly grounded.
• This device is equipped with a three-wire grounding-type plug. This is a safety feature. If you are unable to insert the plug
into the outlet, contact an electrician to replace your outlet with one that will accept this type of plug. Do not attempt to
defeat the purpose of the grounding-type plug. Always follow your local/national wiring codes.
• Warning! There is a risk of explosion if the battery is replaced with an incorrect battery type. Do not attempt to
service the device yourself. Refer all servicing to qualified service personnel.
5