Table des Matières
Publicité
Step 3
Camera Installation
You can install the camera on the wall or ceiling.
Make sure the wall is strong enough to withstand three times the weight of the
camera.
1
Install the Camera
-
Place drill template onto the surface you have chosen to mount the camera.
-
(For cement wall/ceiling only)
insert three expansion screws.
-
Use three metal screws to fix the camera base according to the template.
Mounting
Template
Expansion Screws
2
Adjust the Surveillance Angle
-
Loosen the adjusting screw.
-
Adjust the surveillance angle as your desired place.
-
Tighten the adjusting screw.
Make sure the microSD card slot is facing downward.
Drill screw holes according to the template, and
Metal Screws
3
Publicité
Table des Matières
