Ezviz C2 MINI Guide Rapide page 9

3
To Change the Default Password
After adding the camera, you are required to change the device password to ensure
your video security.
- Locate the verification code as your default password on the label at the back of the
camera.
- Go in the Device Settings interface in the app and tap on the Change Password.
- Enter the verification code as the old password, and type a new password.
4
To Initialize the microSD Card
- Check the microSD card status by tapping on the Storage Status in the Device
Settings interface.
- If the microSD card status displays as Uninitialized, tap to initialize it. The status
will then change to Normal. You can then start recording any event triggered video
in the camera such as motion detection.
5