PQQX13329ZA-BM-E 07.7.25 5:41 PM ページ5
Wall Mounting
This unit can be mounted on a wall.
1
Pull down the handset hook until it locks,
so the tab holds the handset.
2
Tuck the telephone line cord inside
the wall mounting adaptor, and
push it in the direction of the arrow.
≥"UP" should be facing upward.
3
Install screws using the wall
template below. Connect the
telephone line cord. Mount the
unit, and slide down.
To temporarily set the handset down
during a conversation, place it as
shown here.
Wall Template
8.3 cm
Screws
8.3 cm
To Single-Line
Telephone Jack
5