Attaching The Dust Cover - THORENS TD 102 A Manuel D'utilisation

Attaching the dust cover

Insert the hinges completely into the hinge holders at the left and right ends of the back of the main unit.
Align the tops of the hinges with the dust cover hinge holders and insert them.
Removing the dust cover
Hold both edges of the dust cover and lift it slowly to remove it along with the hinges from the unit. Then,
remove the hinges from the dust cover.
Opening and closing the dust cover
Opening
Hold the front edge of the dust cover and gently lift it open completely until it stops. The dust cover will stay
open in this position.
Closing
Gently lower the dust cover until it is closed.
24 ATTACHING THE DUST COVER