Precautions for use
Do not place anything on the dust cover. Objects on the cover might cause noise due to vibrations or fall off,
especially during playing.
Do not place the unit on an amplifier or any other device that generates heat. Doing so could cause discolora-
tion, deformation or malfunction.
Also avoid locations that are subject to vibrations or exposed to excessive dust, cold or moisture.
As the unit could become warm during operation, always leave sufficient space around it for ventilation. When
installing this unit, leave a little space between it and other devices and walls to allow good heat dissipation.
Do not move the unit during playing, the record rotates. Do not lift or move the unit during playing. Doing so
may damage the record, the stylus, the cartridge or the unit.
Always remove the record before relocating or moving this unit. Moving the unit with a record on the platter
could damage the record, the stylus and the cartridge or could cause a malfunction.
The voltage supplied to the unit should match the voltage as printed on the rear panel. If you are in any doubt
regarding this matter, consult an electrician.
Maintenance
Wipe off any dirt on the cabinet and dust cover surfaces using a soft cloth that has been slightly dampened
with a diluted neutral cleanser.
20 PRECAUTIONS FOR USE