Cleaning The Brush Roll - RugDoctor FlexClean FCM-1 Manuel D'utilisation

CLEANING THE BRUSH ROLL

1
TURN THE
MACHINE OFF
Push the POWER
SWITCH to the
"OFF" position
and unplug the
machine from the
grounded outlet.
HOW TO CHANGE THE BRUSH ROLL
1
TURN THE
MACHINE
OFF
Push the
POWER SWITCH to
the "OFF" position
and unplug the
machine from the
grounded outlet.
4
UNLOCK THE BRUSH
ROLL LOCK
Turn the BRUSH ROLL LOCK to
the UNLOCK positon using coin or
screwdriver.
Brush Roll
Lock
7
REPLACE BRUSH ROLL
LOCK COVER
Turn the BRUSH ROLL LOCK to
the LOCK position using a coin
or screwdriver.
Brush Roll
Lock
18
2
GENTLY LAY THE MACHINE
DOWN ON ITS SIDE
Remove CLEAN WATER TANK and
DIRTY WATER TANK. Gently position
the machine on its side to access the
BRUSH ROLL.
2
REMOVE THE TANKS
Remove
the CLEAN
WATER
TANK and
DIRTY
WATER
TANK and
set aside.
5
REMOVE BRUSH ROLL
LOCK COVER
8
MOVE MACHINE
INTO UPRIGHT
POSITION
Replace DIRTY
WATER TANK and
CLEAN WATER
TANK.
F L E X C L E A N A L L - I N - O N E F L O O R C L E A N E R
®
3
REMOVE ANY DEBRIS FROM
BRUSH ROLL
3
LAY THE MACHINE ON ITS SIDE
Gently lay the machine
down on its side.
6
Old Brush Roll New Brush Roll
REPLACE THE BRUSH ROLL
Remove old BRUSH ROLL and
replace with NEW BRUSH ROLL.
9
Now You Are
Ready To Clean
| U s e r M a n u a l