RugDoctor FlexClean FCM-1 Manuel D'utilisation page 8

Assembly
WARNING!
®
Your Rug Doctor FlexClean® All-In-One Floor Cleaner comes in 4 easy-to-assemble components:
• Main Handle
• FlexClean All-In-One Floor Cleaner
®
*A #2 Phillips screwdriver is required for Steps 1 and 4.
1
Remove Screw
Use #2 Phillips
screwdriver to remove
screw in Handle
Connector.
4
Choose One
Attach Carpet Nozzle or
Hard Floor Nozzle as per
desired area to clean.
5
Attach the Nozzle
1. Align the nozzle tabs with
the slots in the base
(in front of the brushroll).
2. Rotate toward machine.
3. Latch the nozzle by pressing
down on the top of the nozzle
until you hear a "click."
8
DO NOT plug in your FlexClean
familiar with all instructions and operating procedures.
• Soft Surface Nozzle (carpet/rug)
• Hard Surface Nozzle (hard floor)
2
Insert
the
Handle.
Insert the
Main Handle
into the
Handle
Connector.
Carpet Nozzle
3
2
1
F L E X C L E A N A L L - I N - O N E F L O O R C L E A N E R
®
All-In-One Floor Cleaner until you are
®
3
Line up the Hole
Align the hole in the Main
Handle with the hole on the
Handle Base. Insert the Screw
and use a
#2 Phillips
screwdriver
to tighten
the Screw
by turning
clockwise.
Hard Floor Nozzle
6
Secure The Cord
Wrap the cord around
the Power Cord Wrap.
Now you are ready to
clean.
| U s e r M a n u a l