Filling The Clean Water Tank - RugDoctor FlexClean FCM-1 Manuel D'utilisation

Operations:

FILLING THE CLEAN WATER TANK

1
Locate the
Clean Water Tank
The CLEAN WATER TANK
is the top tank located on
the front of the machine.
3
Fill the Clean
Water Tank
Turn the CLEAN WATER
TANK upside down.
Unscrew the CLEAN
WATER CAP by turning
counter clockwise.
Remove CLEAN WATER
CAP from the tank and
set aside.
4
Add Cleaning Solution
Fill the tank with HOT tap water
until it reaches the "Fill" line. Add
Rug Doctor All-In-One Cleaning
Solution as directed.
(CLEAN WATER TANK holds
approximately 1 gallon of water.)
Screw the cap back onto the CLEAN WATER
TANK by turning clockwise until completely
tightened.
10
Clean
Water
Tank
Dirty
Water
Tank
F L E X C L E A N A L L - I N - O N E F L O O R C L E A N E R
®
2
Remove the
Clean Water Tank
Push the CLEAN WATER TANK
RELEASE BUTTON and lift the
CLEAN WATER TANK in an
outward motion.
REMEMBER
Always use Rug Doctor cleaning solutions.
Other cleaning solutions may harm the
machine and void the machine warranty.
Fill with hot tap water.
DO NOT USE BOILING WATER! DO NOT
HEAT WATER OR TANK IN MICROWAVE!
5
Place the Clean
Water Tank
Turn CLEAN
WATER TANK
right side
up. Securely
place onto the
machine. You
will hear a "click"
sound when the
tank is locked
into place.
6
Now
You Are
Ready
To Clean
| U s e r M a n u a l